Mini Cycle Go
™
by Wagan
®
4
www.wagan.com
SET UP
1. Support legs fold outwards until the locking pins snap into place. You should
hear a click.
2. Take the tension knob and screw it into the hole on the back of the unit,
opposite the display.
3. Position yourself in a comfortable position on a sturdy chair and start pedaling.
4. The workout tracker will start counting automatically. Press the red button to
select the function you would like to have displayed on the LCD.
5. When you are finished with your exercise and would like to stow the unit away,
pull on the rings underneath the unit at the leg joints on both side.
6. The locking pins will retract and allow the legs to fold back inward.
MULTI FUNCTION WORKOUT TRACKER
S
T
O
P
CNT
RPM
SCAN
TIME
CAL
CNT Rotation count
RPM Revolutions per minute
SCAN Cycles through: TIME > CAL > RPM
TIME Workout duration (Time lapse)
CAL Calories burned (estimated)
To Next Page
Loading...