WAGNER GM 4700AC - Changing Aircoat Nozzle; Cleaning Aircoat Nozzle

25
7.4 CHANGING AIRCOAT NOZZLE
NOTICE
Defective AirCoat nozzle!
Insucient paint application quality.
Do not use sharp-edged objects to treat carbide on the AirCoat nozzle.
1. Relieve the pressure on the spray gun and
product pressure generator.
A
B
C
D
B_02383
B_02261
x
2. Secure the spray gun with the trigger locking
device.
3. Unscrew union nut (A).
4. Remove air cap (B).
5. Press AirCoat nozzle (C) out of air cap (B) by
hand and treat with cleaning agent until all
remaining paint has been dissolved.
Assembly:
6. Fit AirCoat nozzle (C) in nozzle seal (D).
7. Fit air cap (B) over nozzle (C).
Note the attened parts (X) on the nozzle and
in the air cap.
8. Fit the union nut with nozzle guard (A) and
tighten by hand.
7.4.1 CLEANING AIRCOAT NOZZLE
For disassembly and assembly of AirCoat nozzles, see Chapter 7.4.
The AirCoat nozzle (C) can be placed into a cleaning solution which has been
recommended by the paint manufacturer.
VERSION 06/2018
ORDER NUMBER DOC2311730