WAGNER GM 4700AC - Replacing the Sealing Fitting of the Round Jet Nozzle; Replacing the Spring Cap

38
10.7 REPLACING THE SEALING FITTING OF THE ROUND JET NOZZLE
NOTICE
Defective nozzle body!
Poor spray pattern.
Handle the nozzle body (A) with care.
B_00542
B_00543
B_03060
E
D
B
C
A
B_02397
Unscrew the nozzle by hand.
Note:
The sealing tting (E) can be pulled out of the
nozzle body using a small eye wood bolt.
Nozzle wrench (D)
Order No. 128901.
Eject with Ø 1.5 mm; 0.06 inch pin
Hold in position with a size 13
mm; 0.51 inch socket wrench.
10.8 REPLACING THE SPRING CAP
B_05737
1
2
3
4
8 Nm; 5.9 lb ft
VERSION 06/2018
ORDER NUMBER DOC2311730