44
13.2 AIR CAPS
Order no. Designation
2313494 Air cap LV plus (red) for low viscosity products
B_02257
2313497 Air cap HV plus (blue) for high viscosity products
B_02256
2313498 Air cap LA plus (bronze) low air
B_02396
13.3 ANODIZED UNION NUT
Order no. Designation
2330340
Completely anodized union nut (without air cap) suitable for
the processing of water-based coatings
B_03764
13.4 AIRCOAT NOZZLES ACF3000
10° 20° 30° 40° 50° 60° 80° inch
(mm) l/min (gal/min)
07 107 207 407
200
200
0,007 (0,18) 0,23 (0,061)
09 209 309 409 509 609 0,009 (0,23) 0,26 (0,069)
11 111 211 311 411 511 611 811
100
150
0,011 (0,28) 0,38 (0,100)
13 113 213 313 413 513 613 813
100
0,013 (0,33) 0,55 (0,145)
15 115 215 315 415 515 615 815 0,015 (0,38) 0,75 (0,198)
17 217 317 417 517 617 817
60
0,017 (0,43) 0,96 (0,254)
19 219 319 419 519 619 819
50
0,019 (0,48) 1,20 (0,317)
21 221 421 521 621 821 0,021 (0,53) 1,45 (0,383)
23 423 623 823 0,023 (0,58) 1,79 (0,473)
55
(2,17)
100
(3,94)
145
(5,71)
195
(7,68)
250
(9,84)
300
(11,81)
400
(15,75)
B_02399
Article No. 379xxx
In order to determine the article number of a nozzle, please select the
number from the table and replace the three xxx.
Example: nozzle 411 -> article number 379411
Spray angle
Product lter (in mesh)
Edge lter Gun lter
Drilled hole Product ow*
Spray pattern width mm (inch)**
Size
* Tested with water and 100 bar pressure.
** Tested with 110 bar (1595 psi), 30 cm (11.81 inches) distance and lacquer 56DIN-4s.
VERSION 06/2018
ORDER NUMBER DOC2311730
To Next Page
Loading...
