22
GM 4700AC
OPERATING MANUAL
VERSION 06/2014 ORDER NUMBER DOC2311730
6 ASSEMBLY AND COMMISSIONING
6.1 TRAINING ASSEMBLY/COMMISSIONING STAFF
Incorrect installation/operation!
Risk of injury and damage to the device.
The assembly and commissioning sta must have the technical
skills to safely undertake commissioning.
When assembling, commissioning and carrying out all work,
read and follow the operating manuals and safety regulations
for the additionally required system components.
WARNING
6.2 STORAGE CONDITIONS
Until the point of assembly, the device must be stored in a dry location, free of vibrations
and with a minimum amount of dust. The device must be stored in enclosed rooms.
The air temperature at the storage location must be between -20 °C and +60 °C; -4 °F and
+140 °F.
The relative air humidity at the storage location must be between 10 and 95% (without
condensation).
6.3 INSTALLATION CONDITIONS
The air temperature at the installation site must be in a range between 0 °C and +40 °C;
+32 and +132 °F.
The relative air humidity at the installation site must be between 10 and 95% (without
condensation).
A skilled person must check to ensure that the device is in a reliable state after it is installed
and commissioned.
To Next Page
Loading...
