33
GM 4700AC
B_02261
x
A
B
C
D
B_02383
OPERATING MANUAL
VERSION 06/2014 ORDER NUMBER DOC2311730
7.3.4 CHANGING THE AIRCOAT NOZZLE
1. Relieve the pressure on the spray gun and product pressure generator.
2. Secure the spray gun with the locking device.
3. Unscrew union nut (A).
4. Remove air cap (B).
5. Press AirCoat nozzle (C) out of air cap (B) by hand and treat with cleaning agent until
all remaining paint has been dissolved.
6. Assembly:
Fit AirCoat nozzle (C) in nozzle seal (D).
7. Fit air cap (B) over nozzle (C). Note the attened parts (X) on the nozzle and in the air
cap.
8. Fit the union nut with nozzle guard (A) and tighten by hand.
NOTICE
Defective AirCoat nozzle!
Insu cient paint application quality
Do not use sharp-edged objects to treat carbide on the AirCoat nozzle.
To Next Page
Loading...
