OPERATING MANUAL
VERSION 06/2014 ORDER NUMBER DOC2311730
8.1.3 FLUSHING AND CLEANING THE GUN
Observe safety instructions in Chapter 4.
The spray gun and the device must be cleaned and ushed daily. The cleaning/ ushing
agents used for cleaning or ushing must correspond with the working material.
Trigger guard locking device in secured
position
Air
Product
NOTICE
Flushing agent in the air duct!
Functional faults caused by swollen seals.
Always point the spray gun down when cleaning.
Ensure that neither paint nor ushing agent enters the air duct.
Never immerse the spray gun in cleaning agent or water.
To Next Page
Loading...
