WAGNER GM 4700AC - Changing or Cleaning Filter Insert

42
GM 4700AC
B_03649
64
83
66
67
OPERATING MANUAL
VERSION 06/2014 ORDER NUMBER DOC2311730
1. Flush and clean the gun as described in Chapter 8.1.3.
2. Relieve the pressure of gun and device.
3. Secure the gun with the locking device.
4. Loosen the  lter housing (67) manually with turning handle (66) and unscrew it.
When the product hose together with  lter housing and  lter insert has been
exposed, push the rotary handle (66) back onto the upper  lter connection.
5. Pull the  lter insert (64) out of the  lter housing (67).
6. Thoroughly clean all parts with  ushing agent.
Assembly:
7. Push the cleaned or new  lter insert (64) with opening downwards into the  lter
housing (67).
8. Insert the  lter housing (67) into the turning handle, screw in manually with the
turning handle and tighten.
8.4 CHANGING OR CLEANING FILTER INSERT
open
close