54
GM 4700AC
"?
"?
B_03060
E
D
B
C
A
B_02397
OPERATING MANUAL
VERSION 06/2014 ORDER NUMBER DOC2311730
10.7 REPLACING THE SEALING FITTING OF THE ROUND JET NOZZLE
Unscrew the nozzle by hand.
Note:
The sealing tting (E) can be pulled out of the
nozzle body using a small eye wood bolt.
Nozzle wrench (D)
Order No. 128901.
Eject with Ø 1.5 mm; 0.06 inch pin
Hold in position with a size
13 mm; 0.51 inch socket wrench.
NOTICE
Defective nozzle body!
Poor spray pattern
Handle the nozzle body (A) with care.
To Next Page
Loading...
