57
GM 4700AC
B_02394
X
X
OPERATING MANUAL
VERSION 06/2014 ORDER NUMBER DOC2311730
1. Dismount all movable and heat-sensitive (positions X) of the spray gun.
2. Use the air gun to heat the area around the hollow screw to approx. 150 °C; 302 °F.
10.8.3 DISASSEMBLY
3. Loosen the hollow screw with a size SW13; 0.51 inches open-end wrench, then
remove the lter connection.
4. Thoroughly clean all re-usable parts with a suitable solvent.
Hot gun housing!
Burns
Wear protective gloves when dismounting the lter connection
WARNING
Heat to approx. 150 °C;
302 °F with hot-air gun
To Next Page
Loading...
