WAGNER GM 4700AC - 13 Accessories; Round Jet Nozzle Cap; Nozzle Inserts RXX; Complete Nozzle Screw Joint

63
GM 4700AC
B_02277
B_02278
13.1.1
13.1.2
B_02398
13.1
OPERATING MANUAL
VERSION 06/2014 ORDER NUMBER DOC2311730
Order No. Designation Marking Volumetric  ow
rate*
Jet **
132720 Nozzle insert R11 11 0.16; 160 approx. 250; 9.84
132721 Nozzle insert R12 12 0.22; 220 approx. 250; 9.84
132722 Nozzle insert R13 13 0.27; 270 approx. 250; 9.84
132723 Nozzle insert R14 14 0.34; 340 approx. 250; 9.84
132724 Nozzle insert R15 15 0.38; 380 approx. 250; 9.84
132725 Nozzle insert R16 16 0.43; 430 approx. 250; 9.84
132726 Nozzle insert R17 17 0.48; 480 approx. 250; 9.84
132727 Nozzle insert R18 18 0.53; 530 approx. 250; 9.84
132728 Nozzle insert R19 19 0.59; 590 approx. 250; 9.84
132729 Nozzle insert R20 20 0.65; 650 approx. 250; 9.84
132730 Nozzle insert R21 21 0.71; 710 approx. 250; 9.84
132731 Nozzle insert R22 22 0.77; 770 approx. 250; 9.84
* Volumetric  ow in l/min; cc/min water at 10 MPa; 100 bar; 1450 psi
** Jet
in mm; inches at a distance of 30 cm; 11.8 inches from the object and at a pressure of
10 MPa; 100 bar; 1450 psi, synthetic resin paint, 20 DIN 4 seconds.
13.1 ROUND JET NOZZLE CAP
Order No. Designation
394180 Round jet nozzle cap (without
nozzle insert)
13 ACCESSORIES
Order No. Designation
132922 Nozzle screw joint, complete
13.1.1 NOZZLE INSERTS RXX
13.1.2 COMPLETE NOZZLE SCREW JOINT