WAGNER GM 4700AC - Aircoat Nozzles ACF3000; Aircoat Pre-Atomizer Nozzles ACF3000 Plus

65
GM 4700AC
10° 20° 30° 40° 50° 60° 80° inch
(mm) l/min (gal/min)
07 107 207 407
200 200
0,007 (0,18) 0,23 (0,061)
09 209 309 409 509 609 0,009 (0,23) 0,26 (0,069)
11 111 211 311 411 511 611 811
100
150
0,011 (0,28) 0,38 (0,100)
13 113 213 313 413 513 613 813
100
0,013 (0,33) 0,55 (0,145)
15 115 215 315 415 515 615 815 0,015 (0,38) 0,75 (0,198)
17 217 317 417 517 617 817
60
0,017 (0,43) 0,96 (0,254)
19 219 319 419 519 619 819
50
0,019 (0,48) 1,20 (0,317)
21 221 421 521 621 821 0,021 (0,53) 1,45 (0,383)
23 423 623 823 0,023 (0,58) 1,79 (0,473)
55
(2,17)
100
(3,94)
145
(5,71)
195
(7,68)
250
(9,84)
300
(11,81)
400
(15,75)
B_02399
20° 30° 40° 50° 60°
08 208 308 408 508
200
200
0,008 (0,20) 0,22 (0,058)
10 210310 410510 610
150
0,010 (0,25) 0,32 (0,084)
12 212312 412512 612
100 100
0,012 (0,30) 0,44 (0,116)
14 214 314 414 514 614 0,014 (0,36) 0,60 (0,159)
16 216 316 416 516 616 0,016 (0,41) 0,76 (0,201)
18 218318 418518 618
60 50
0,018 (0,46) 0,92 (0,244)
20 320 420 620 0,020 (0,51) 0,11 (0,030)
22 422 622 0,022 (0,56) 0,14 (0,036)
100
(3,94)
145
(5,71)
195
(7,68)
250
(9,84)
300
(11,81)
B_04161
OPERATING MANUAL
VERSION 06/2014 ORDER NUMBER DOC2311730
13.4 AIRCOAT NOZZLES ACF3000
Article no. 379xxx
In order to determine the article number of a nozzle, please select the
number from the table and replace the three xxx.
Example: nozzle 411 -> Article number 379411
Spray angle
Material  lter (mesh)
Gap- lter Gun  lter
Drilled hole Material  ow*
Spray pattern width mm (inch)**
Size
13.5 AIRCOAT PREATOMIZER NOZZLES ACF3000 PLUS
Article No. 321xxx
In order to determine the article number of a nozzle, please select the
number from the table and replace the three xxx.
Example: nozzle 410 -> article number 321410
Spray angle
Material  lter (mesh)
Gap- lter Gun  lter
Drilled hole Material  ow*
Spray pattern width mm (inch)**
Size
inch (mm) l/min (gal/min)
* Tested with water and 100 bar pressure.
** Tested with 110 bar; 1595 psi, 30 cm; 11.81 inches distance and lacquer 56DIN-4s.
* Tested with water and 100 bar pressure.
** Tested with 110 bar; 1595 psi, 30 cm; 11.81 inches distance and lacquer 56DIN-4s.