the tool function is impaired. Have damaged parts repaired before using the tool.
Many accidents have their origin in power tools that have been maintained badly.
Use the power tool, accessories, insert tools, etc. in accordance with these f)
instructions and in a fashion specied for this special tool type. Take the
working conditions and the activity to be carried out into consideration. The
use of power tools for purposes other than the intended ones can lead to dangerous
situations.
5. Service
Have your tool repaired only by qualied specialist personnel and only with a)
original spare parts. This ensures that the tool safety is maintained.
If the supply cord is damaged, it must be replaced by the manufacturer or it’s b)
service agent or a similarly qualied person in order to avoid a safety hazard.
Safety Instructions for Spray Guns
Attention! Danger of injection
Spray materials emerge from nozzle tips under high pressure.
Never point the spray stream towards human beings or animals.
The spray gun is to be used only for paints and solvents with a 21° C (32° in UK) ashpoint
•
or higher (See information on the material tin. Hazard class A II and A III permitted).
The spray gun is not to be used in work places covered by Ex-protection regulations.
•
To avoid the hazard of explosion when spraying, provide for eective natural or
•
articial ventilation.
No sources of ignition are to be in the immediate area when spraying, e.g. open ame,
•
cigarettes, sparks, glowing wires and hot surfaces.
Before carrying out any work on the spray gun, unplug the lead from the power
•
socket.
Do not use spray guns to spray ammable liquids.
•
The spray guns are not to be cleaned with ammable solvents which have a ashpoint
•
under 21°C.
Take precautionary measures against potential hazards from the spray liquid and
•
follow any instructions given on containers or laid down by the manufacturer of the
liquid.
Do not spray any liquid of unknown hazard potential.
•
Wear a breathing mask and ear protection.
•
With original WAGNER accessories and spare parts, you have the guarantee that all
safety regulations are fullled.
Technical Data
Max. delivery rate: 270 g/min Container capacity: 800 ml
Max. viscosity: (runout time) 80 sec. Double insulation:
Max. pressure spikes: 150 bar Pump: Replaceable
Power source: 230 V, 50 hz Pump cylinder: Special steel
Power consumption: 110 W Piston: Hard-chrome-plated
special steel Ø 5 mm
To Next Page
Loading...
Need help?
General
