Walker T27i - ADJUST MOWER CUTTING HEIGHT, IF REQUIRED; CHECK SECURITY OF DRIVE WHEEL BOLTS; PERFORM ANY ADDITIONAL PROCEDURES called for on the MAINTENANCE SCHEDULE CHART

Assembly Instructions
28
ADJUST MOWER CUTTING HEIGHT, IF RE-
QUIRED
Position the hitch pins in the four deck support pins.
Refer to the “Cutting Height Adjustment” decal on
the deck gearbox cover.
CHECK SECURITY OF DRIVE WHEEL BOLTS
The eight (8) lug bolts mounting the drive tires should
each be torqued to 75 to 85 lb·ft (102 to 115 N·m).
PERFORM ANY ADDITIONAL PROCEDURES
called for on the MAINTENANCE SCHEDULE
CHART in Maintenance Instructions.