Stepper Motor Driver DQ542MA
Electrical specification:
Consumption：80W； Internal Insurance
：6A
Working Temperature -10～45℃；
Stocking temperature -40℃～70℃
No condensation, no water droplets
Prohibition of combustible gases and
conductive dust
Pins assignments and description:
1) Connector Pins Configurations
Pulse signal, PUL+ is the positive end of pulses input pin PUL- is the negative
end of pulse input pin
DIR signal: DIR+ is the positive end of direction input pin DIR- is the negative
end of direction input pin
To Next Page
Need help?
General
