Waring CTS1000 - Cleaning Instructions

10
• Switch toaster to the OFF position, allow the toaster to cool
completely and unplug.
CAUTION: DO NOT ATTEMPT TO CLEAR THE JAM
UNTIL THE TOASTER HAS COOLED THOROUGHLY.
• To clear jam, remove reector/crumb tray and, using a long
object, preferably made of wood, dislodge object causing jam.
Cleaning Instructions
• CAUTION: Switch toaster off, wait for READY/HOT switch to
turn off, then unplug. Do not touch hot surfaces until the unit
has cooled.
• IMPORTANT: Do not clean your conveyor toaster using
abrasive cleaners or pads. This will scratch and dull the
surface of your unit.
• CAUTION: Do not spray, rinse or submerge the toaster
in any liquid. Excessive moisture in the unit will cause a
severe electrical hazard and may otherwise damage
the toaster.
• Wipe the exterior of the toaster with a damp sponge or cloth
soaked in hot or warm detergent water. Wipe with a clean,
damp cloth to remove excess detergent and then wipe to dry
the toaster.
• Remove the reector/crumb tray, toast drawer and wire bread
feeder from the unit and empty them. Wash them in warm
detergent water and rinse them. Dry tray, drawer and rack
thoroughly.