The Waring WDM Series Drink Mixers are commercial-grade appliances designed for preparing blended beverages. These mixers offer both manual and assisted timer programming options, catering to various operational preferences in a professional kitchen or bar setting.
Function Description:
The primary function of the Waring WDM Series Drink Mixers is to blend ingredients for drinks, such as milkshakes, smoothies, and other mixed beverages. The device features a timer system that allows users to program specific blending durations, ensuring consistent results across multiple preparations. It supports both manual and assisted programming modes, providing flexibility in how blending times are set and managed.
Important Technical Specifications:
While specific power ratings and dimensions are not provided in the manual, the device is clearly identified as a "COMMERCIAL" product, indicating its robust construction and suitability for high-volume use. The timer can be programmed for durations ranging from 1 second to 9 minutes and 59 seconds. The display shows time in a "MM:SS" format (e.g., R0:00, 0:40). The device includes "SPEED" and "PULSE" functions, suggesting variable speed control and a momentary high-speed option for quick bursts of blending.
Usage Features:
Manual Timer Programming:
- Initial State: When programming for the first time, the display will show "R0:00". If reprogramming, it will show the current customized time.
- Entering SET Mode: To set the time, the user must press and hold the "-" button for 3 seconds. The display will blink during SET mode, showing "SX:XX" (where X represents the digits for minutes and seconds).
- Adjusting Time: Use the "-" and "+" buttons to scroll to the desired time.
- Setting Time: After reaching the desired time, wait 5 seconds, and the time will be automatically set.
- Resetting Time: To reset the time to "R0:00", press and hold both the "-" and "+" buttons simultaneously for 3 seconds.
Assisted Timer Programming:
- Initial State: Similar to manual programming, the display will show "R0:00" if programming for the first time. If the timer is already programmed, pressing and holding the "-" and "+" buttons simultaneously for 3 seconds will reset it to "R0:00".
- Actuation and Counting Up: Mount the cup onto the mixer and actuate the device. The timer will immediately begin to count up from 0:00.
- Desired Consistency: Once the mix reaches the desired consistency, remove the cup.
- Continuing Blend (Optional): If additional blend time is needed, remount the cup within 10 seconds to continue the count from where it left off.
- Setting Time: To set the observed blending time, press and hold the "+" button for 3 seconds. This action programs the timer with the duration that was just counted up.
General Usage Tips & Tricks:
- Quick Scrolling: Pressing and holding either the "-" or "+" button allows for rapid scrolling through time, with increments of 10 seconds.
- Reset to R Mode: Pressing and holding both the "-" and "+" buttons simultaneously resets the time to "0:00" and enters "R" mode.
- Time Range: The programmable time range is from 1 second to 9 minutes and 59 seconds.
- Speed Control: Speeds are selected manually and cannot be programmed. They can be adjusted manually during operation. This implies that the timer primarily controls the duration of blending at a user-selected speed.
- Pulse Speed: The pulse speed can also be adjusted manually during operation, offering precise control for short, powerful blending bursts.
Maintenance Features:
The manual does not explicitly detail maintenance features such as cleaning instructions or component replacement. However, the commercial nature of the product implies that it is designed for easy cleaning and durability in a demanding environment. The ability to reset the timer to a default "R0:00" setting can be considered a form of operational maintenance, allowing users to quickly clear previous settings and start fresh. The robust construction and clear programming steps suggest a user-friendly design aimed at minimizing downtime and maximizing efficiency in a commercial setting.
To Next Page
Need help?
General
