EasyManua.ls Logo

WARN Works 1500AC - Maintenance; Wire Rope Care and Spooling

Default Icon
23 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
MAINTENANCE
No lubrication is required for the life of the winch.
Inspect the wire rope before and after each winching operation. Replace when
damaged.
TO AVOID INJURY AND PROPERTY DAMAGE:
Wear heavy leather gloves when handling wire rope.
Never winch with less than 5 wraps of wire rope around
drum.
STRETCHING THE WIRE ROPE
The life of a wire rope is directly related to the care and use it receives. During its
first use, a new wire rope must be spooled onto its drum under a load of at least 500
lb. (227kg). Spool out the entire wire rope length leaving 5 wraps on the drum, then
power in the wire rope under a load of 500 lb. (227kg) or more. This will stretch
new wire rope and create a good wire wrap around the drum. Failure to do so may
result in the outer wire wraps drawing into the inner wraps, binding, and damaging
the wire rope.

Related product manuals