5
Contents
Introduction ..................................................................................................7
Technical data..............................................................................................8
Installation ..................................................................................................11
Function control and safety checklist .........................................................22
Safety rules ................................................................................................24
Mechanical and electrical design ...............................................................25
Procedure for use.......................................................................................51
Fault-finding .............................................................................................102
Maintenance.............................................................................................136
Trouble-shooting ......................................................................................138
The manufacturer reservs the right to make changes to design and
material specifications.
Safety instructions
• The machine is designed for water washing only.
• The machine must not be used by children.
• All installation operations are to be carried out by qualified
personnel. Licensed personnel are necessary for all electric
power wiring.
• The interlock of the door must be checked daily for proper
operation and must not be bypased.
• All seepage in the system, due to faulty gaskets etc., must be
repaired immediately.
• All service personnel must be fully familiar with the operating
manual before attempting any repair or maintenance of the
machine.
• The machine must not be sprayed with water, otherwise short
circuiting may occur.
• Fabrics softener with volatile or inflammable fluids are not to
be used in the machine.
EXSM 230 C and 350 C
To Next Page
Loading...