WASD V3 Quick Reference Guide

V3 / V3B Quick Reference Guide
Version 1.20 Firmware
The V3 keyboard features a DIP switch on the backside of the keyboard to enable or disable various
modes of function.
Box Contents
1. Mechanical Keyboard x1
2. USB Cable x1
3. Wire Keycap Puller x1
DIP Switch Settings
Unplug keyboard before changing DIP switch positions.
Plug the keyboard back in for new settings to take effect.
Switch State
Function
Notes
SW 1 Off
SW 2 Off
QWERTY Mode
Default QWERTY Layout
SW 1 On
SW 2 Off
Mac Mode
QWERTY Layout, Reverses Alt and OS Key Positions
SW 1 Off
SW 2 On
Dvorak Mode
Dvorak Layout
SW 1 On
SW 2 On
Colemak Mode
Colemak Layout
SW3 Off
Scroll Lock LED = Scroll Lock LED
SW3 On
Scroll Lock LED = Current Layer LED
SW4 Off / On
Factory Reset
Unplug keyboard and set SW4 on. Plug in keyboard. All
indicator LED’s will flash red for 20 seconds and then
solid blue, then solid green which means factory reset is
complete.
SW 5 Off
SW 6 Off
Fn key enabled Layers
disabled
Pgm key disabled
Only Fn key is enabled (Default)
Menu Key = Fn Key
Right Ctrl = Right Ctrl
SW 5 On
SW 6 Off
Fn key enabled Layers
enabled
Pgm key disabled
Only Fn key, and Layers are enabled
Menu Key = Fn Key
Right Ctrl = Right Ctrl
SW 5 Off
SW 6 On
Fn key enabled Layers
enabled
Pgm key enabled
All special functions enabled (Fn, Layers, Pgm)
Menu Key = Fn Key
Right Ctrl = Pgm Key
SW 5 On
SW 6 On
Fn key disabled
Layers disabled
Pgm key disabled
All special functions disabled
Menu Key = Menu Key
Right Ctrl = Right Ctrl

WASD V3 Specifications

General

Connection Type	USB
N-Key Rollover	Yes
Case Material	Plastic
Keycaps	Customizable
Switch Type	Cherry MX
Keycap Material	ABS
Size	Full-size
Layout	ANSI
Programmability	Yes
Form Factor	Full-size or Tenkeyless
Actuation Force	Varies by switch type
Travel Distance	4mm
Weight	Varies by model
Dimensions	Varies by model