WASHTOWER WSTT185 - User Manual

To Next Page

70-181-17

www.washtower.com

Montageanleitung / Assembling instruction / Notice

de mont ge / Montaje de instrucción / Instrukcja

montażu / Сборка инструкция / Montáž instrukce /

Montáž inštrukcie / Szerelési utasítás / Сглобяване

инструкция / Kurulum Talimatları / Montagem de

instrução / Sestavljanje navodila Montage instructie

/ Склапање инструкцију / Asamblarea de

instrucțiuni / Sastavljanje upute / Montering instrukti-

on / Istruzioni di montaggio / Збірка інструкція /

Montāžas instrukcija / Montavimo instrukcija /

Paigaldusjuhend

DE- Vor die montage, bitte beiliegende anweisungen folgen / EN- Before starting, refer to the assembling advice in annex / NL- Voordat u begint

Zie de installatie-instructies / FR- Avant de commencer, se reporter aux conseils de montage en annexe / PL - Przed rozpoczęciem zapoznać

się z instrukcją montażu / RU- Перед началом обратитесь к инструкции по установке / CZ- Před zahájením naleznete v montážním návodu

/ SK- Pred začatím nájdete v montážnom návode / HU- Megkezdése előtt olvassa el a telepítési utasításokat / BG-Преди да започнете се

отнасят към инструкциите за инсталиране / TR- Kuruluma baslamadan once, montaj talimatnamesini sirasiyla takip edin. / ES-Antes de

comenzar referirse a las instrucciones de instalación / P- Antes de começar a consultar as instruções de instalação / SLO- Pred začetkom glejte

navodila za namestitev / SRB- Пре почетка погледајте упутства за инсталацију / RO-Înainte de a începe să consultați instrucțiunile de

instalare / HR- Prije početka pogledajte upute za instalaciju / S- Innan du börjar se Installationsanvisningen / I- Avanti di comminciare, riportate

agli consigli di montaggio / UKR- Перед початком зверніться до інструкції з установки / LV- Pirms sākt montāžu, iepazīties ar instrukciju / LT-

Prieš pradedant kreiptis į montavimo instrukcija / EST- Enne käivitamist vaadake paigaldusjuhiseid

O 10 mm

max.

50kg

max.

80kg

TÜV geprüft

nach DIN EN 14749:2016-06

2. PfG 1988/05.2012

Prüfbericht 602739090, 12.09.2019

WSTT185

Need help?

Do you have a question about the WASHTOWER WSTT185 and is the answer not in the manual?

This document provides assembly and maintenance instructions for the WASHTOWER, a modular furniture system designed to house washing machines and tumble dryers. The WASHTOWER is available in several configurations, including models WSTT185, WSTN022, and WSCH207-45, with various dimensions and components to suit different appliance sizes and storage needs.

Function Description:

The WASHTOWER is a specialized furniture unit designed to integrate laundry appliances, specifically washing machines and tumble dryers, into a cohesive and organized space. It serves to elevate appliances for ergonomic loading and unloading, provide additional storage, and create a neat appearance in laundry rooms or utility areas. The modular design allows for flexibility in configuration, accommodating different appliance types and sizes, and offering options such as drawers and pull-out shelves for enhanced functionality. The structure is engineered to support the weight of heavy appliances, including wet laundry, and incorporates features for stability and safety.

Important Technical Specifications:

The WASHTOWER system is built with various components, each with specific dimensions and quantities, as detailed in the assembly instructions. Key components and their specifications include:

WSTT185 Model:
- Overall dimensions: Approximately 670 mm (width) x 1850 mm (height) x 654 mm (depth).
- Maximum load capacity for the top shelf: 50 kg.
- Maximum load capacity for the pull-out shelf (for dryer): 80 kg.
- Main panels (WTK 101, WTK 102): 1823 x 653 x 22 mm.
- Top panel (WTK 201): 671 x 654 x 22 mm.
- Shelf (WTK 401): 626 x 585 x 22 mm.
- Front panel (WTK 701): 620 x 68 x 16 mm.
- Base panel (WTK 901): 545 x 450 x 22 mm.
- Support beams (WTK 902, WTK 903, WTK 904, WTK 905): Various dimensions (e.g., 450 x 33 x 16 mm, 626 x 190 x 16 mm, 530 x 70 x 16 mm, 592 x 70 x 16 mm).
- Hardware includes: cam locks (a1, a2), dowels (b1, b25), screws (s1, s2, s3, s5, s7, s8, s9), brackets (b6, b9, b12), hinges (wL, wR, zL, zR), and aluminum profiles (b13, b14).
- The appliance compartment is designed for washing machines/tumble dryers with maximum dimensions of 62 cm (width), 86 cm (height), and 65 cm (total depth). The available standing space on the metal plate has a depth of 58.8 cm.
- Small appliances need to be centered, ensuring at least 20 mm space in depth and width.
- The maximum weight for one appliance is not to exceed 120 kg, including wet laundry.
WSTN022 Model:
- Overall dimensions: Approximately 670 mm (width) x 2058 mm (height) x 653 mm (depth).
- Main panels (WTK 115): 205 x 653 x 22 mm.
- Shelves (WTK 412): 626 x 490 x 16 mm.
- Back panel (WTK 611): 202 x 634 x 2.5 mm.
- Front panel (WTK 712): 619 x 202 x 16 mm.
- Hardware includes: cam locks (a2), dowels (b1, b2, b12, b19, b20, b21, b22), screws (s1, s8, s9, s13, s14), and gas springs (k1).
- The maximum load capacity for the pull-out shelf is not explicitly stated but implied to be substantial enough for a dryer.
WSCH207-45 Model:
- Overall dimensions: Approximately 450 mm (width) x 2058 mm (height) x 654 mm (depth).
- Main panels (WTK 110, WTK 111): 2001 x 634 x 16 mm.
- Top panel (WTK 206): 450 x 654 x 22 mm.
- Shelves (WTK 405, WTK 406): Various dimensions (e.g., 418 x 570 x 16 mm, 418 x 400 x 16 mm).
- Back panel (WTK 604): 2004 x 427 x 2.5 mm.
- Front panel (WTK 706): 1995 x 446 x 16 mm.
- Hardware includes: cam locks (a2), dowels (b1, b2, b3, b7, b12, b15, b19, b20, b21, b22, b29, b30, b31), screws (s1, s4, s5, s8, s9, s13, s14, s18), and gas springs (k1).
- The maximum load capacity for the pull-out shelf is not explicitly stated but implied to be substantial enough for a dryer.

The WASHTOWER is TÜV certified according to DIN EN 14749:2016-06 and 2. PfG 1988/05.2012, with test report 602739090, dated 12.09.2019, ensuring compliance with safety and quality standards.

Usage Features:

Appliance Compatibility: Designed for washing machines and tumble dryers with specific maximum dimensions (62 cm width, 86 cm height, 65 cm total depth). Only washing machines and tumble dryers with electronic unbalance control are suitable. Only condensation dryers are permitted.
Ergonomic Height: Elevates appliances to a comfortable height, reducing the need to bend down for loading and unloading.
Stability and Safety: The unit must be securely fixed to the wall to prevent tipping. All screws and connecting parts should be regularly tightened to maintain stability. Height-adjustable feet ensure the unit stands level and stable on uneven floors.
Storage Options: Some models include drawers or pull-out shelves (e.g., WSC146 with drawer, WSC162 with drawer and pull-out shelf) for storing laundry essentials or for use as a temporary surface.
Space Optimization: The modular design helps optimize space in laundry areas, providing a dedicated and organized spot for appliances.
Ventilation: The design includes features to ensure adequate ventilation for appliances, crucial for their efficient operation and longevity.

Maintenance Features:

General Cleaning: For proper care, use a clean, dry, and soft cloth for cleaning. For more thorough cleaning, the cloth can be slightly moistened with water or a furniture-specific cleaning agent, then wipe the cleaned surfaces dry.
Metal and Glass Parts: Clean metal and glass components with commercially available cleaning agents designed for these materials, following the instructions provided with the cleaning products.
Avoid Harsh Cleaners: Do not use corrosive, abrasive, or any cleaning agents with unknown properties. Cleaning agents must clearly state that they are suitable for furniture care.
High-Gloss Elements: High-gloss elements with protective foil removed should only be cleaned and used after 72 hours to allow the finish to fully cure.
Wall Mounting: The cabinets and shelving units must be firmly attached to the wall. This is a critical safety measure to prevent the unit from tipping over, especially with heavy appliances. Always check the type and strength of the wall before mounting and use appropriate wall plugs and screws. If in doubt, consult a specialist.
Regular Tightening: Regularly retighten all screws and connecting parts to ensure continuous stability and prevent loosening over time.
Appliance Manufacturer Instructions: It is imperative to observe the operating and assembly instructions provided by the appliance manufacturer.
Moisture Protection: The furniture is designed with a metal protection base. However, should moisture damage or swelling occur due to water spillage despite the metal protection base, the product is no longer suitable for use and should be discarded.
Base Fixing Kit: Depending on the appliance manufacturer, a base fixing kit might be necessary to install the washing machine and/or tumble dryer securely within the WASHTOWER.

WASHTOWER WSTT185 Specifications

General

Brand	WASHTOWER
Model	WSTT185
Category	Indoor Furnishing
Language	English