© 2016 WASS Electronics, Inc. For information on our products, visit our website: www.wasselectronics.com
How To Use the WASS Electronics
1. Before using the Grill for the first time, wipe the Grill Plates with a damp cloth to remove
2. To preheat: Place the Lid over the grill plate and plug cord into a 120V AC outlet. The
Indicator Light (LED) will illuminate indicating that the elements are heating to the
selected temperature. Allow the grill to fully preheat.
3. Always use a pot holder to carefully open the Lid.
4. Carefully place the items to be cooked on the grill plate.
5. Close the Lid and allow the food to cook for the desired time. (Consult the Recipe
Section at the back of this book for some suggestions.) The LED Indicator will remain
on during use. Do not leave appliance unattended during use!
6. After the desired amount of time, the food should be done.
7. Disconnect the plug from the wall outlet.
CAUTION: To avoid any sparks at the outlet while disconnecting plug, make
sure the "LED Indicator Light" is off (not illuminated) before disconnecting the
8. Always use a pot holder to carefully open the lid.
9. Remove the food using a plastic or wooden spatula. Be sure to always use either plastic
or wooden utensils so as not to scratch the non-stick surface! Never use metal tongs,
forks or knives as these can damage the coating on the cooking plates.
Never use metal tongs, forks or knives as these can damage
the coating on the cooking plates! This will void the warranty!
To Next Page
Loading...