Watchguard Firebox M200 - Activate Your Device; Navigate to Activation Website; Account Management; Enter Serial Number

2 3
Activate Your Device
1. Go to www.watchguard.com/activate
2. Log in to your WatchGuard account, or create a new account*.
*If you create a new account, return to www.watchguard.com/activate after you nish the account
creation process.
3. Type the serial number for your device.
4. During activation, select your setup method:
• RapidDeploy QuickStart – Automatically download and apply a QuickStart
conguration le to your device, pre-congured with security settings
recommended by WatchGuard.
• Classic Activation – Use the Web Setup Wizard to create a basic conguration le
for your device.
5. Use the setup directions in this guide that match the method you selected.
English