21 22
SETTING THE TIME
1� Pull the crown out to the 1st position�
2� Turn the crown to set hour and minute hands�
3� After the time has been set, push the crown back to the normal position�
Hour hand
Minute hand
Normal crown position
1st position
Seconds hand
Ligne 6-3/4x8’’’
Total Thickness 3�15mm
Hands 3 (H/M/S) at center
Vibration Frequency 32,768Hz
Accuracy ±20 seconds / month worn under normal circumstances
Battery Life 3 Years
Battery Silver oxide SR626SW or equivalent
Additional Mechanisms Two-pole stepping motor
Second hand stopping at optional position
Powercell saving reset mechanism
Over-loading compensation device
2035 SUPER caliber Instructions and Specications 2035 SUPER caliber Instructions and Specications
To Next Page
Loading...