25 26
SETTING THE TIME
The movement has a contact stud (pusher) on the back which is used to set the time�
Please do not over-press the pusher as it could damage the movement.
1� Press one time on the pusher to advance the minute hand one step, along with the
mechanically-coupled minute hand�
2� Press and hold the pusher to make the coupled hands go forward until the pusher is
released�
Movement Quartz Swiss
Ligne 5-1/2’’’
Diameter ø15�55 x ø13�00mm
Total Thickness 2�6mm
Hands 2 (H/M) at center
Jewels 4
Theoretical Autonomy 48 months
Battery 379 Silver Oxide
Additional Mechanisms Back electronic setting
FRONT BACK
Hour hand
Minute hand
Contact stud
656 SOPROD caliber Instructions and Specications 656 SOPROD caliber Instructions and Specications
To Next Page
Loading...