Need help?Do you have a question about the Water2Buy W2B500 and is the answer not in the manual?
Follow safety rules for water pressure, temperature, freezing, and chemical storage to maintain product integrity and warranty.
Turn off mains water, cut the incoming pipe, install elbow joints, and consider non-return/regulating valves.
Install plumbing fittings by removing clips, lubricating o-rings, and securing fasteners for meter or timer units.
Ensure bypass valves are fully open by turning them clockwise with the tool, essential for correct operation.
Connect the 15mm waste tubing to the control valve's waste fitting and secure it with a jubilee clip.
Connect the 15mm overflow tubing to a suitable drainage location and secure with a jubilee clip.
General| Salt Type | Not applicable |
|---|---|
| Power Consumption (Cooling) | 80 W |
| Child Safety Lock | Yes |
| Material | Plastic and Stainless Steel |
| Power Supply | 230V ~50Hz |
| Heating Capacity | 5 L/h |
| Water Bottle Compatibility | Standard 19L Bottles |
| Type | Bottom Loading Water Dispenser |
| Weight | 12 kg |
| Cooling Capacity | 2.5 L/h |
To Next Page
