Waterman Basic - Page 13

Assembly and Operating Instructions 'Basic' Pools
English
13
Pool setup (round pools)
Before setting the pool up, check that all required parts are available according to the attached parts list:
Swimming pool
diameter/depth
Pack of prole rails
Top rail Q2
Bottom rail Q2
Liner with
J-hook
Steel wall
with perforation and
2 fastening rails
Screw set and
screw cover
Ground-
ing
kit
Ø 300 cm x 90 cm 1 1 1 1 1
Ø 350 cm x 90 cm 1 1 1 1 1
Ø 400 cm x 90 cm 1 1 1 1 1
Ø 300 cm x 110 cm 1 1 1 1 1
Ø 400 cm x 110 cm 1 1 1 1 1
Ø 500 cm x 110 cm 1 1 1 1 1
Ø 300 cm x 120 cm 1 1 1 1 1
Ø 350 cm x 120 cm 1 1 1 1 1
Ø 400 cm x 120 cm 1 1 1 1 1
Ø 450 cm x 120 cm 1 1 1 1 1
Ø 500 cm x 120 cm 1 1 1 1 1
Ø 550 cm x 120 cm 1 1 1 1 1
THERE ARE 3 DIFFERENT MOUNTING OPTIONS
Above ground / ground level
Semi-inground
(Attention, the built-in part of the
pool requires a lean concrete
backll.)
Completely inground
(Possible only with a lean con-
crete backll (20 – 30 cm.) The
pool must always be lled with
water, never leave without water
for a longer period.