To Next PageTo Next Page
Need help?Do you have a question about the Waterpik WP-660 and is the answer not in the manual?
General| On/off switch | Yes |
|---|---|
| Product color | White |
| Treatment time | 90 s |
| Handle(s) features | Ergonomic |
| Water tank capacity | 0.65 L |
| Number of flosser tips | 7 pc(s) |
| Maximum operating pressure | 6.9 bar |
| Minimum operating pressure | 0.7 bar |
| Number of pressure settings | 10 |
| Power source | AC |
| AC input voltage | 120 V |
Weight and Dimensions| Depth | 96.5 mm |
|---|---|
| Width | 119.4 mm |
| Height | 262.9 mm |
| Weight | 662 |
Identifies the main parts of the Waterpik Water Flosser unit, including the reservoir, handle, and tips.
Lists and describes various specialized tips for different cleaning needs, such as orthodontic and plaque seeking.
Details on priming the unit for first-time use and adjusting the water pressure setting for optimal cleaning.
Step-by-step instructions on how to operate the Water Flosser during use, including angling the tip and cleaning sequence.
Explains the timer function for pacing cleaning between mouth arches and total cleaning time.
Describes the mode for enhanced gum stimulation using a unique water pulsation pattern.
Instructions for using the Pik Pocket tip to deliver solutions deep into periodontal pockets.
Guidance on using the orthodontic tip to clean around braces and between teeth.
Instructions on using the toothbrush tip for cleaning teeth at the gumline with light pressure.
Details on using the Plaque Seeker tip to gently brush along the gumline and between teeth.
Guidance on using mouthwash or antibacterial solutions and rinsing the unit afterward.
Procedure for cleaning internal parts using vinegar to remove hard water deposits and maintain performance.
Information on product service, warranty claims, and contacting customer support for assistance.
