WaterTech MC-1 - Display Information

ENGLISH
8
FILTER REPLACEMENT
DISPLAY INFORMATION
FILTER
REPLACEMENT
Standard “Blue” screen
Flashing “Red” screen = CHANGE FILTER
*Screen will ash “Red” when system counts down to 100 liters or 5 days remaining.
Screen will also ash “Red” if battery is low.
2
IMPORTANT: FOR COLD WATER USE ONLY
Each MC-1 Filter is designed to process 1892 liters (500 gallons) of water OR
operate for 180 days - whichever comes rst, at which time the Filter must be
changed. If you have low/no water pressure from faucet, you may need optional
hand pump. If you generally have good water pressure, from faucet, and MC-1 water
production decreases signicantly the Filter is clogged and must be replaced.