Need help?Do you have a question about the Watkins Wellness Freshwater Salt System and is the answer not in the manual?
General| Brand | Watkins Wellness |
|---|---|
| Model | Freshwater Salt System |
| Category | Water Filtration Systems |
| Language | English |
Determines system run time and guides chlorine level maintenance (0-10).
Test fill water for metals, phosphates, and calcium before filling the spa.
Procedure for filling the spa with water and inserting the cartridge.
Instructions for adding salt to reach the target level of 1,750 ppm.
Test and adjust pH, alkalinity, and calcium hardness to system parameters.
Shock the spa water with chlorine to establish a sanitizer residual.
Reduce calcium hardness if it exceeds the recommended level of 75 ppm.
Adjust output level and monitor chlorine residual for optimal system function.
Recommended water testing and balancing before each spa use.
Regular testing and confirmation of output level every 10 days.
Guidance on when and how to replace the chlorine-generating cartridge.
Explains system status messages and required actions for optimal performance.
How to test for and address high phosphate levels affecting chlorine generation.
Procedures for removing metals before system start-up to prevent staining.
Troubleshooting steps for when no chlorine is detected in the spa water.
Steps to address and reduce excessively high chlorine levels in the spa.
To Next Page
