Home Page
The resting-state display shows the following set of data. The first prompt appears in the
top display, the second in the bottom.
Active: Always
[``97] Upper Display
[safe] Lower Display
Monitor the
processes
determined by the
Upper Display
[UdSP] and Lower
Display [LdSp]
parameters Display
Menu.
Display Parameter Range Default Modbus Conditions for
Address Parameters to Appear
read/write
Watlow Series 97 Parameters ■ 6.3
Home Page
NOTE: For more information about how parameter seetings affect the controller’s operation, see Chapter Five, Features.
To Next Page
Loading...
