Watlow ez-zone pm - Page 97

Watlow EZ-ZONE
®
PM Integrated Controller • 94 • Chapter 8 Factory Page
Factory Page
Dis-
play
Parameter name
Description
Range Default
Parameter
Appears in
Menu When
Modbus
Relative Ad-
dress
CIP
Class
Instance
Attribute
hex (dec)
Profibus
Index
Data
Type
&
Read/
Write
[`iid]
[ iid]
Custom Setup (1
to 20)
Instance ID
Select which
instance of the
parameter will be
selected.
1 to 4 If there
is only
one valid
instance
for corre-
sponding
class mem-
ber then
not active,
otherwise
active.
- - - - - - - - - - - - - - - -
[`LoC]
[FCty]
Security Setting Menu
[LoC;o]
[LoC.o]
Security Setting
Operations Page
Change the secu-
rity level of the
Operations Page.
1 to 3 2 Always
- - - - - - - - - - - - - - - -
[LoC;P]
[LoC.P]
Security Setting
Profiling Page
Change the secu-
rity level of the
Profiling Page.
1 to 3 3 Always
- - - - - - - - - - - - - - - -
[pas;e]
[LoC.P]
Security Setting
Password Enable
Turn security fea-
tures on or off.
[`off] Off
[``on] On
Off Always
- - - - - - - - - - - - - - - -
[rLoC]
[rLoC]
Security Setting
Read Lock
Set the read se-
curity clearance
level. The user can
access the selected
level and all lower
levels.
If the Set Lockout
Security level is
higher than the
Read Lockout Se-
curity, the Read
Loc
kout Security
level takes prior-
ity.
1 to 5 5 Always
- - - - - - - - - - - - - - - -
Note:
Some values will be rounded off to fit in the four-character display. Full values can be read with
other interfaces.
If there is only one instance of a menu, no submenus will appear.
R: Read
W: Write
E:
EEPROM
S:
User
Set