Watlow ez-zone pm - Page 117

Watlow EZ-ZONE
®
PMI Controller • 113 • Chapter 6 Setup Page
Setup Page
Display
Parameter Name
Description
Range Default
Modbus
Relative Ad-
dress
CIP -
Class
Instance
Attribute
hex (dec)
Pro-
fibus
Index
Param-
eter
ID
Data
Type
and
Access
**
Fn
Fn
Digital Input (7 to
12)
Action Function
Select the func-
tion that will be
triggered by a true
state for Digital In-
puts 7 through 12.
Note:
Modbus Map 1
has instances 7
through 10 only
nonE None (61)
s.stp Start Step
(1077)
P.StS Profile Start/
Stop, level triggered
(208)
ProF Start Profile,
edge triggered (196)
P.hoL Profile Hold/
Resume, level trig-
gered (207)
P.diS Profile Dis-
able, level triggered
(206)
t.da TRU-TUNE+
®
Disable, level trig-
gered (219)
oFF Switch Control
Loop Off, level trig-
gered (90)
ЛЏAn Manual, level
triggered (54)
tUnE Tune, edge
triggered (98)
idLE Idle Set Point,
level triggered (107)
F.AL Force Alarm to
occur, level trig-
gered (218)
AoF Control Loops
Off and Alarms to
Non-alarm State,
level triggered (220)
SiL Silence Alarms,
edge triggered (108)
ALЛЏ Alarm Reset,
edge triggered (6)
P.LoC Keypad Lock-
out, level triggered
(217)
usr.r User Set Re-
store, edge trig-
gered (227)
r.En Remote Set
Point (216)
None Instance 7
Map 1 Map 2
1404 1644
Offset to
next instance
(Map 1 & Map
2) equals +20
0x6E
(110)
7 to C
(12)
3
138 10003 uint
RWES
* These parameters/prompts are available in these menus with firmware revisions 11.0 and above.
** R: Read, W: Write, E: EEPROM, S: User Set