Watlow ez-zone pm - Page 156

Watlow EZ-ZONE
®
PMI Controller • 152 • Chapter 6 Setup Page
Setup Page
Display
Parameter Name
Description
Range Default
Modbus
Relative Ad-
dress
CIP -
Class
Instance
Attribute
hex (dec)
Pro-
fibus
Index
Param-
eter
ID
Data
Type
and
Access
**
iP.F4
ip.F4
Communications (2)
IP Fixed Address
Part 4
Set the IP address
of this module.
Each device on the
network must have
a unique address.
0 to 255 1 - - - - - - - - - - - - 17017 uint
RWE
iP.S1
ip.S1
Communications (2)
IP Fixed Subnet
Part 1
Set the IP subnet
mask for this mod-
ule.
0 to 255 255 - - - - - - - - - - - - 17020 uint
RWE
iP.S2
ip.S2
Communications (2)
IP Fixed Subnet
Part 2
Set the IP subnet
mask for this mod-
ule.
0 to 255 255 - - - - - - - - - - - - 17021 uint
RWE
iP.S3
ip.S3
Communications (2)
IP Fixed Subnet
Part 3
Set the IP subnet
mask for this mod-
ule.
0 to 255 0 - - - - - - - - - - - - 17022 uint
RWE
iP.S4
ip.S4
Communications (2)
IP Fixed Subnet
Part 4
Set the IP subnet
mask for this mod-
ule.
0 to 255 0 - - - - - - - - - - - - 17023 uint
RWE
iP.S5
ip.S5
Communications (2)
IP Fixed Subnet
Part 5
Set the IP subnet
mask for this mod-
ule
0 to 255 0 - - - - - - - - - - - - 17024 uint
RWE
iP.S6
ip.S6
Communications (2)
IP Fixed Subnet
Part 6
Set the IP subnet
mask for this mod-
ule.
0 to 255 0 - - - - - - - - - - - - 17025 uint
RWE
* These parameters/prompts are available in these menus with firmware revisions 11.0 and above.
** R: Read, W: Write, E: EEPROM, S: User Set