EasyManua.ls Logo

Watlow Ez-Zone PM4 - Page 50

Default Icon
101 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Watlow EZ-ZONE
®
PM PID Controller 47 Chapter 6 Setup Page
Setup Page
Dis-
play
Parameter name
Description
Range Default
Parameter
Appears
in Menu
When
Modbus Rela-
tive
Address
CIP
Class
Instance
Attribute
hex (dec)
Profibus
Index
Data
Type
&
Read/
Write
[`oP;8]
[ op.8]
Linearization (1)
Output Point 8
Set the value that will
be mapped to input 8.
-1,999.000 to 9,999.000 7.0 Always Instance 1
Map 1 Map 2
- - - - 3608
0x86 (134)
1
0x19 (25)
172 float
RWES
[`iP;9]
[ ip.9]
Linearization (1)
Input Point 9
Set the value that
will be mapped to
output 9.
-1,999.000 to 9,999.000 8.0 Always Instance 1
Map 1 Map 2
- - - - 3590
0x86 (134)
1
0x10 (16)
173 float
RWES
[`oP;9]
[ op.9]
Linearization (1)
Output Point 9
Set the value that will
be mapped to input 9.
-1,999.000 to 9,999.000 8.0 Always Instance 1
Map 1 Map 2
- - - - 3610
0x86 (134)
1
0x1A (26)
174 float
RWES
[iP;10]
[ip.10]
Linearization (1)
Input Point 10
Set the value that will
be mapped to output
10.
-1,999.000 to 9,999.000 9.0 Always Instance 1
Map 1 Map 2
- - - - 3592
0x86 (134)
1
0x11 (17)
175 float
RWES
[oP;10]
[op.10]
Linearization (1)
Output Point 10
Set the value that will
be mapped to input
10.
-1,999.000 to 9,999.000 9.0 Always Instance 1
Map 1 Map 2
- - - - 3612
0x86 (134)
1
0x1B (27)
176 float
RWES
[``Pu]*
[`Set]
Process Value
[``Fn]
[ Fn]
Process Value (1)
Function
Set the function that
will be applied to the
source or sources.
[`oFF] Off (62)
[`alt] *Pressure to Alti-
tude (1649)
Off Always if
part num-
ber digit 4
is C, R, J, B,
E or N.
PM8 and 9
only
Instance 1
Map 1 Map 2
- - - - 3320
0x7E (126)
1
0x15 (21)
123 uint
RWES
[p;unt]
[P.unt]
Process Value (1)
Pressure Units
Set the units that
will be applied to the
source.
[`psi] Pounds per Square
Inch (1671)
[pasc] Pascal (1674)
[atm] Atmosphere (1675)
[mbr] Millibar (1672)
[torr] Torr (1673)
PSI Always Instance 1
Map 1 Map 2
- - - - 3334
0x7E (126)
1
0x1C (28)
- - - - uint
RWES
[a;unt]
[A.unt]
Process Value (1)
Altitude Units
Set the units that
will be applied to the
source.
[`Hft] Kilofeet (1677)
[``ft] Feet (1676)
HFt Always Instance 1
Map 1 Map 2
- - - - 3336
0x7E (126)
1
0x1D (29)
- - - - uint
RWES
Note:
Some values will be rounded off to fit in the four-character display. Full values can be read with
other interfaces.
* Available with PM4, PM8 and PM9 models only
R: Read
W: Write
E:
EE-
PROM
S:
User
Set
* Pressure Altitude calculation is based on the International Standard Atmosphere, 1976

Table of Contents

Other manuals for Watlow Ez-Zone PM4

Related product manuals