Watlow Ez-Zone PM6 - Chapter 5: Operations Page (Continued); Profile Status Operations

Watlow EZ-ZONE
®
PM PID Controller • 38 • Chapter 5 Operations Page
Operations Page
Display
Parameter name
Description
Range Default
Parameter
Appears in
Menu When
Modbus Rela-
tive Address
CIP
Class
Instance
Attribute
hex (dec)
Profibus
Index
Data
Type
&
Read/
Write
[P;ACr]
[PACr]
Profile Status
Action Request
[nonE] None (61)
[step] Step Start
(89)
[`End] Terminate
(148)
[rESU] Resume (147)
[PAUS] Pause (146)
[ProF] Profile (77)
None Always Instance 1
Map 1 Map 2
2540 4360
0x7A (122)
1
0xB (11)
205 uint
RW
[`StP]
[ StP]
Profile Status
Active Step
View the currently
running step.
1 to 40 0 (none) a profile is
active.
Instance 1
Map 1 Map 2
2526 4346
0x7A (122)
1
4
- - - - uint
R
[S;typ]
[S.typ]
Profile Status
Active Step Type
View the currently
running step type.
UStP] Unused Step
(50)
[`End] End (27)
[``JL] Jump Loop
(116)
[CloC] Wait For Time
(1543)
[W;bo] Wait For Both
(210)
[W;Pr] Wait For Pro-
cess (209)
[`W;E] Wait For
Event (144)
[SoAH] Soak (87)
[``ti] Time (143)
[rAtE] Rate (81)
a profile is
active.
Instance 1
Map 1 Map 2
2544 4364
0x7A (122)
1
0xD (13)
- - - - uint
R
[t;SP1]
[tg.SP]
Profile Status
*Target Set Point
Loop 1
View or change the
target set point of the
current step.
-1,999.000 to
9,999.000°Forunits
-1,128.000 to
5,537.000°C
0.0°F
or
units
-18.0°C
a profile is
active.
Instance 1
Map 1 Map 2
2542 4502
0x7A (122)
1
0xC (12)
- - - - uint
RW
[aC;sp]
[AC.SP]
Profile Status
Produced Set Point
1
Display the current
set point, even if the
profile is ramping.
-1,999.000 to
9,999.000°Forunits
-1,128.000 to
5,537.000°C
0.0°F
or
units
-18.0°C
Always Instance 1
Map 1 Map 2
- - - - - - - -
- - - - - - - - float
R
Note:
Some values will be rounded off to fit in the four-character display. Full values can be read with
other inter- faces.
* Available with PM4, PM8 and PM9 models only
R: Read
W: Write
E: EEPROM
S: User
Set