EasyManua.ls Logo

Watlow Ez-Zone PM8 - Page 36

Default Icon
101 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Watlow EZ-ZONE
®
PM PID Controller 33 Chapter 5 Operations Page
Operations Page
Display
Parameter name
Description
Range Default
Parameter
Appears in
Menu When
Modbus Rela-
tive Address
CIP
Class
Instance
Attribute
hex (dec)
Profibus
Index
Data
Type
&
Read/
Write
[`dio]
[oPEr]
Digital Input/
Output Menu
[`do;S]
[ do.S]
Digital Output (5 to 6)
Output State
View the state of this
output.
[`off] Off (62)
[``on] On (63)
Direction
(Setup Page,
Digital In-
put/Output
Menu) is set
to Output.
Instance 1
Map 1 Map 2
1012 1132
Offset to next
instance equals
+30
0x6A (106)
1 to 2
7
90 uint
R
[`ei;S]
[ Ei.S]
Digital Input (5 to 6)
Event Status
View this event input
state.
[`off] Off (62)
[``on] On (63)
Direction
(Setup Page,
Digital In-
put/Output
Menu) is
set to Input
Voltage or
Input Dry
Contact.
Instance 1
Map 1 Map 2
1328 1568
Offset to next
instance equals
+20
0x6E (110)
1 to 2
5
140 uint
R
EZ-Key/s (1 to 2)
Event Status
View this event input
state.
[`off] Off (62)
[``on] On (63)
Instance 1
Map 1 Map 2
1368 1608
Instance 2
Map 1 Map 2
- - - - 1628
0x6E (110)
3 to 4
5
140
[LiM]
[oPEr]
Limit Menu
[`LL;S]
[ LL.S]
Limit (1)
Low Set Point
Set the low process
value that will trigger
the limit.
-1,999.000 to
9,999.000°Forunits
-1,128.000 to
5,537.000°C
0.0°For
units
-18.0°C
Limit Sides
(Setup Page)
is not set to
High.
Instance 1
Map 1 Map 2
684 724
0x70 (112)
1
3
38 float
RWES
[`Lh;S]
[ Lh.S]
Limit (1)
High Set Point
Set the high process
value that will trigger
the limit.
-1,999.000 to
9,999.000°Forunits
-1,128.000 to
5,537.000°C
0.0°For
units
-18.0°C
Limit Sides
(Setup Page)
is not set to
Low.
Instance 1
Map 1 Map 2
686 726
0x70 (112)
1
4
39 float
RWES
[Mon]
[oPEr]
Monitor Menu
[C;MA]
[C.MA]
Monitor (1)
Control Mode Active
View the current con-
trol mode.
[`off] Off (62)
[AUto] Auto (10)
[MAn] Manual (54)
Always Instance 1
Map 1 Map 2
1882 2362
0x97 (151)
1
2
- - - - uint
R
[`h;Pr]
[ h.Pr]
Monitor (1)
Heat Power
View the current heat
output level.
0.0 to 100.0% 0.0
Heat algo-
rithm is not
set to Off.
(Setup Page)
Instance 1
Map 1 Map 2
1904 2384
0x97 (151)
1
0xD (13)
- - - - float
R
Note:
Some values will be rounded off to fit in the four-character display. Full values can be read with
other inter- faces.
* Available with PM4, PM8 and PM9 models only
R: Read
W: Write
E: EEPROM
S: User
Set

Table of Contents

Other manuals for Watlow Ez-Zone PM8

Related product manuals