Watlow Ez-Zone PM8 - PID Tuning and Autotuning

Watlow EZ-ZONE
®
PM PID Controller • 71 • Chapter 8 Factory Page
Factory Page
Dis-
play
Parameter name
Description
Range Default
Parameter
Appears in
Menu When
Modbus
Relative Ad-
dress
CIP
Class
Instance
Attribute
hex (dec)
Profibus
Index
Data
Type
&
Read/
Write
[``Sn]
[ Sn]
Diagnostics Menu
Serial Number
Display the serial
number.
0 to 2,147,483,647 - - - - 0x65 (101)
1
0x20 (32)
- - - - string
RWE
[dAtE]
[dAtE]
Diagnostics Menu
Date of Manufac-
ture
Display the date
code.
0 to 2,147,483,647 Instance 1
Map 1 Map 2
14 14
0x65 (101)
1
8
- - - - dint
RWE
[USr;r]
[USr.r]
Diagnostics Menu
User Restore Set-
tings
Replace all of this
controller's settings
with another set.
[FCty] Factory (31)
[none] None (61)
[SEt1] User Set 1 (101)
[SEt2] User Set 2 (102)
None Instance 1
Map 1 Map 2
24 24
0x65 (101)
1
0xD (13)
117 uint
RWE
[USr;S]
[USr.S]
Diagnostics Menu
User Settings Save
Save all of this con-
troller's settings to
the selected set.
[SEt1] User Set 1 (101)
[SEt2] User Set 2 (102)
[none] None (61)
None Always Instance 1
Map 1 Map 2
26 26
0x(101)
1
0xE (14)
118 uint
RWE
[C;led]
[C.LEd]
Diagnostics Menu
Communications
LED Action
Turns comms LED
on or off for selected
comms ports.
[Con1] Comm port 2
[Con2] Comm port 1
[both] Comm port 1
and 2
[`off] Off
both Always - - - - - - - - - - - - - - - -
[2one]
[Zone]
Diagnostics Menu
Zone
Turns Zone LED on
or off based on selec-
tion.
[`off] Off
[``on] On
On Always - - - - - - - - - - - - - - - -
[Chan]
[Chan]
Diagnostics Menu
Channel
Turns Channel LED
on or off based on
selection.
[`off] Off
[``on] On
On Always - - - - - - - - - - - - - - - -
[d;prs]
[dPrS]
Diagnostics Menu
Display Pairs
Defines the number
of Display Pairs.
1 to 10 2 Always - - - - - - - - - - - - - - - -
[`d;ti]
[ d.ti]
Diagnostics Menu
Display Time
Time delay in tog-
gling between chan-
nel 1 and channel 2.
0 to 60 0 Always - - - - - - - - - - - - - - - -
Note:
Some values will be rounded off to fit in the four-character display. Full values can be read with
other interfaces.
If there is only one instance of a menu, no submenus will appear.
R: Read
W: Write
E:
EEPROM
S:
User
Set