Notes on Safety Usage
Key points
● Equipment connected to the [ Auto On / Off1] sockets will not work if the
main [ Control2] equipment is not turned on.
● DO NOT connect a power strip to any socket of EASY-OFF Auto Power
Board.
● Do not exceed the total maximum load for the EASY-OFF Auto Power Board.
● Do not exceed the maximum load of 10A / 2400W either with a single
appliance or with a group of appliance connected via a power strip.
● Do not plug 2 or more EASY-OFF Auto Power Board together.
● For indoor use only.
● Always ensure the plug of any appliance is inserted fully into the EASY-OFF
Auto Power Board.
Caution
Auto On / Off1
On the back
NETBOOK or
PC/NB SLIDE
SWITCH5
Indicator lights
On /Off button
Control2
Normal4 Reset3
Parts
4. [ Normal4] sockets are not switchable and provide continu-
ous power for devices which always need to be stayed ON at
all time.
5. Plug your EASY-OFF Auto Power Board into an available wall power sock-
ets, and ensure it’s ON.
6. Turn ON your control equipment in the normal way.
7. The indicator light on the EASY-OFF Auto Power Board will light up and all
connected appliances will operate normally.
3. The Indicator [ CONTROL ON ] light will turn off.
Automatically turns off PC & equipment
Indicator Lights
How to Set Up
1. Turn off all the appliances or equipment to be connected to the EASY-OFF
Auto Power Board.
2. Plug your chosen
control equip-
ment into the [
Control2] socket.
We recommended
your PC or Laptop,
or TV.
3. Connect the periph-
eral equipment you
wish to automatically
control into the
[ Auto On / Off1]
sockets.
2. After approximately
1 minute the power
to the 4 [ Auto On
/ Off1] sockets
will cut off ensuring
the connected equip-
ment is turned off.
1. Turn off the ap-
pliance or equip-
ment connected to
the [ Control2]
socket.
● PROTECTED Indicator Light
The light indicates the surge protection is working well when
lighted.
● POWER ON Indicator light
The light indicates the EASY-OFF Auto Power Board is con-
nected to the wall socket properly.
● CONTROL ON indicator light
The light indicates the EASY-OFF Auto Power Board are fed
with power.
To Next Page
Loading...
Need help?
Power
Noise Filter
Weight and Dimensions