American Wavefrontier Corp
100 Pacifica Suite 260
Irvine, CA 92618 - 3 -
Assemble Support Arms on both side using B3 & B13. Do not
use B2.
Parts: B3, B13 Tools: Phillips, Wrench
Attach Sub Reflector using B2 & B12. You will find a little hold
on the center of the side. This side with hole should be placed
down.
Parts: B2, B12 Tools: Phillips, Wrench
Attach LNBF Guide using B5. Pay attention the orientation of
LNBF Guide.
Parts: A4, B4 Tools: Phillips
Attach Main Reflector using B1, B12.
Parts: B1, B12 Tools: Phillips, Wrench
To Next Page
Loading...
