SAFETY
This instrument is
wired
for earth grounding
via the
facility
power
wiring.
Do
no
bypass
earth grounding with two wire extension
cords,
plug adapters,
etc.
BEFORE PLUGGING IN
the
instrument,
comply with installation instructions.
MAINTENANCE may require power
on with
the
instrument
covers removed. This
should
be done
only
by
qualified
personnel aware of the
electrical hazards.
The instrument power receptical
is connected to the
instrument safety earth
terminal
with
a
green/yellow wire.
Do not alter this connection.
(Reference:
(®
or
/h
stamped
inside the rear panel near the
safety earth
terminal.)
WARNING notes call attention
to
possible injury or death
hazards in subsequent
operations.
CAUTION notes
call attention
to possible
equipment damage
in
subsequent
operations.
To Next Page
Loading...
