4 Intended Use Operating instructions DUO 315
(05.11) KS_DUO 315_BA_04_701474600_00.doc
4
4 Intended Use
This equipment is intended to weld Waviduo PE fittings, suitable for
SDR 26 and SDR 33 pipe work systems.
Green mode is designed to weld fittings from 40mm to 160mm.
Brown mode is designed to weld fittings from 200mm to 315mm.
5 Introduction
This manual gives instructions on the correct assembly and safe use of
your welding unit. It is important that you read these instructions
carefully, and keep these instructions for the life of the unit.
This manual does not detail the specific welding procedure for the
fittings: scraping, clamping and assembly of joints. For this information
you must contact the manufacturer of the fittings.
6 Delivered Items
Carefully remove the welding unit from its packaging and check that you
have the following items:
Welding unit.
Green welding cable.
Brown welding cable.
Carrying case
When parts are missing or damaged, please contact your dealer.
Optional extras (not supplied):
Green link cable
To Next Page
Loading...