EasyManua.ls Logo

weatherables Stanford User Manual

Default Icon
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Installation Guide
Aluminum Straight Railing
Question and Answer IconNeed help?

Do you have a question about the weatherables Stanford and is the answer not in the manual?

weatherables Stanford Specifications

General IconGeneral
Brandweatherables
ModelStanford
CategoryHousehold Appliance
LanguageEnglish

Summary

Important Notes on Railing Installation and Compliance

Installer Responsibilities and Code Compliance

Details installer responsibility for codes, permits, and liability for unsafe installations.

Installation Guidelines and Standards

States instructions are guidelines, may need modification, and railing meets specific code standards.

Preparation and Components for Railing Installation

Key Installation Tips

Provides advice on cutting aluminum, checking measurements, using fasteners, and painting.

Included Components Overview

Lists and illustrates the parts included in the railing kit for installation.

Recommended Tools for Installation

Lists essential tools required for the proper installation of the railing system.

Section 1: Rail Sizing and Preparation

Post Installation and Rail Spacing

Ensures posts are installed correctly with skirts before measuring rail width.

Adjusting Rail Width for Fit

Details how to shorten rails and center spindles, adjusting cut lines if needed.

Cutting Aluminum Rails and Inserts

Provides instructions on cutting rails and vinyl inserts to the correct length.

Section 2: Attaching Foot Blocks

Foot Block Placement and Height

Specifies the typical 2" distance from mounting surface to bottom rail.

Securing Foot Blocks to Bottom Rail

Guides centering and securing the foot block connector with a screw.

Installing Foot Blocks and Drainage Holes

Instructs on tapping foot blocks into place and drilling weep holes for drainage.

Section 3: Installing Bottom Rail Brackets

Bracket Placement on Bottom Rail

Ensures brackets are slid onto the bottom rail with the back facing the posts.

Positioning Bottom Rail Between Posts

Guides placing the bottom rail, using blocks for a straight installation.

Securing Brackets to Posts and Rail

Details attaching brackets to posts and securing them to the bottom rail.

Section 4: Installing Top Rail and Spindles

Inserting and Setting Spindles

Instructs on inserting spindles into the bottom rail and tapping them into place.

Aligning and Placing Top Rail

Guides aligning spindles with top rail holes and lowering the top rail.

Securing Top Rail Brackets and Post Caps

Covers attaching brackets to posts, securing top rail, and installing post caps.