06
D
GB
Teaching in Telestart transmitter
1 Insert the battery in the battery compartment of the transmitter.
2 Remove the 1 A fuse (black) from the heater's fuse holder
(voltage interruption).
3 Wait at least 5 seconds.
4 Replace fuse in heater's fuse holder and press the OFF-button on the transmit-
ter for at least 1 second within 5 seconds.
5 Teaching is completed.
A second, third or fourth hand-held transmitter can be programmed in the same
manner.
NOTE:
The learning process can be repeated as often as necessary. The "oldest" trans-
mitter will be deleted each time.
min. 5 sec.
max. 5 sec.
min. 1 sec.
1314649A_BA_T91.book Page 21 Wednesday, December 2, 2009 3:11 PM
To Next Page
Loading...
