14
See Owner's Guide for complete gas instructions.
Prepare Grill for Cylinder Installation
Check that the burner control knob is in the off (
)
position. Your grill was shipped with burner control
knob in the off ( ) position, but you should check to be
sure that it is turned off. Check by pushing in burner
control knob and turning clockwise. If it does not turn,
it is off. If is does turn, continue turning the burner
control knob clockwise until it stops; then it is off.
Install the LPG Cylinder
Turn the LPG cylinder so the opening of the valve is
facing the right side or back of the grill.
Place the LPG cylinder on the cylinder rest (1).
Secure the cylinder to the cylinder bracket using the
cylinder strap (2).
m WARNING: The cylinder must be secured to the
cylinder bracket when grill is in use.
m WARNING: Make sure that the LPG cylinder valve
is closed. Close by turning valve clockwise.
2
1
To Next Page
Loading...
Need help?
General
