WEBSTER CHICAGO 79 - Page 7

WEBSTER CHICAGO
control lever ( Fig. 2) operating on a cam
attached to the motor control lever.
J - TAKE-UP DRUM WILL NOT TURN
OR SLIPS WHEN RECORDING
Increase pressure of motor shaft against
the idler wheel ( Fig. 10) by bending cam
followers. ( Figs. 4, 5, 6).
Fig. 4 — MOTOR POSITION ADJUSTMENT
BULLETIN 79P038
MODEL 79 AND MODEL 80
K - SUPPLY SPOOL WILL NOT TURN
OR SLIPS WHEN REWINDING WIRE
Increase pressure of motor shaft against the
take-up wheel by bending the cam followers.
(Figs. 4, 5, 6, 10).
Adjustments can best be made by use of a
slotted bar.
4