Need help?Do you have a question about the Weco G5 Series and is the answer not in the manual?
General| Brand | Weco |
|---|---|
| Model | G5 Series |
| Category | Security Sensors |
| Language | English |
Fix transmitter/receiver to doors with bolts, ensuring labels face outwards.
Verify that both receiver and transmitter are positioned at the same height.
Mount power supply on car top and ensure the steel cover is grounded.
Connect power supply to input terminals and output signals to output terminals.
Connect receiver/transmitter cables to controller input, ensuring smooth bending.
Power on, check yellow LED (receiver) and red LED (interruption).
Check cable connection, filter cleanliness for no receiver LEDs.
Address dirty filters, nearby IR equipment, or strong ambient light.
Troubleshoot wrong NC/NO contacts or broken output relay.
Verify power supply wiring, terminal connections, or unit integrity.
Keep cables away from high voltage, motors, and door drives.
Avoid direct sunlight, clean lenses gently, and do not scratch edges.
Check yellow LED, clean lenses, verify connections, and test detection.
Details on model number, DC, and AC input voltage for the power supply.
Configuration options for buzzer functions, delay, and active modes via DIP switches.
Safety warning about installation by qualified technicians and not drilling the PCB.
Itemized list of components included in the power supply package.
To Next Page