weinor BiEasy 15M Go! - Contents; General; Notes on the Operating Instructions; Standards and Guidelines

Ⓒ weinor GmbH & Co. KG EN | 49
1 General
1.1 Notes on the operating instructions
The content structure is based on the life cycles of the
BiEasy 15M Go! remote control (hereinafter referred to as
the “device”).
The manufacturer reserves the right to make changes to the
technical data in these operating instructions at any time. In
somecases,thistechnicaldatamaydi󰀨erfromthoseofthe
respective device version; however, the functional informa-
tionwillnotundergosignicantchangesorbecomeinvalid.
Thecurrentversionofthetechnicalspecicationsmaybe
requested from the manufacturer at any time. No claims
may be asserted against the manufacturer as a result of the
preceding provision. Deviations from textual or visual state-
ments may occur depending on the device's technical de-
velopment, features and accessories. Deviating information
for special versions will be provided by the manufacturer
in the sales documentation. Other information shall remain
una󰀨ectedbytheseprovisions.
1.2 Standards and guidelines
During construction, the fundamental health and safety
requirements were applied and provision was made for the
appropriate legislation, standards, directives and guidelines.
ThesafetyoftheproductisconrmedbytheDeclarationof
Conformity (see Section 5, EC Declaration of Conformity). All
information relating to safety in these installation instructions
refers to the laws and regulations that are currently valid in
Germany. All information in these installation instructions
BiEasy-15Mgo_weinor_BA_18112801_DE+EN_0218.indb 49 26.02.2018 13:50:46