weinor BiEasy 15M Go! - Page 74

74 | EN Ⓒ weinor GmbH & Co. KG
4.5.6 Menu version
Indicationofthecurrentrmwareversion
4.5.7 Expert menu
The expert menu is not usually activated. It can be activated
by pressing and holding down the following key combination
in the dialogue box of the menu version:
rst<softkeybuttonleft>+then<softkeybuttonright>.
The expert menu is accessible via the menu structure until
thedisplayshutso󰀨(2minuteswithoutbuttonoperation).
“All on/o󰀨”
In the factory settings, the central channel is available:
“All on”.
If this is not desired or does not make sense (e.g., when
operating both shutters and awnings) this function can be
deactivatedbypushing“Allo󰀨”.
Selectingthe“Allo󰀨”settingdeactivatesthecontroloptions
for the central channel.
“INFO on/o󰀨”
TheOnoro󰀨functionforthecyclicpollingoftheindividual
channels at the start and during the travel movement for
the central channel. Depending on the individual channels
inthecentralchannel,thecut-outcansignicantlyreduce
radiotra󰀩cduringtransmission.Inthecaseofacut-out,
the position indicator is updated by the transmitter's internal
runtime.
BiEasy-15Mgo_weinor_BA_18112801_DE+EN_0218.indb 74 26.02.2018 13:50:47