weinor BiLine Combio-868 MVLED - Maintenance and Repairs; Maintaining the Remote-Receiver

Assembly and installation instructions
Item number 116692-0000
We reserve the right to make technical
changes
Version 2
15.11.2013
Page 12/28
BiLine Combio-868 MVLED/ MLED
Maintenance and repairs 7
Electric shock!
 Work involving 230 V mains may only be carried out by a trained electrician.
 Disconnect the unit from the power supply before performing any work.
Maintaining the remote-receiver 7.1
It is not possible to carry out repairs on the remote-receiver itself. In the event of a malfunction or
defect, the device will need to be replaced.
If a component does not react as expected, you must check the connections.
You should:
• check that the connectors are correct and have been tightly connected
•
test all line contacts
DANGER